Help & Documentation

• Linux: Requires ntfs-3g, parted, mkfs.fat, mkfs.ntfs utilities
• Windows: Administrator privileges may be required
• macOS: Administrator privileges may be required

# Ubuntu/Debian
sudo apt-get install ntfs-3g parted dosfstools ntfsprogs

# Fedora/RHEL
sudo dnf install ntfs-3g parted dosfstools ntfsprogs

# Arch Linux
sudo pacman -S ntfs-3g parted dosfstools

1. Select ISO: Click "SELECT ISO" button or drag and drop an ISO file. Ixio will automatically analyze it.
2. Select USB Drive: Choose your USB drive from the list. Multiple drives can be selected for simultaneous flashing.
3. Review Configuration: Check the automatic settings (partition scheme, filesystem, target system).
4. Flash: Click "FLASH" button and confirm the operation.
5. Verification: Wait for verification to complete (enabled by default).

There are two ways to select an ISO file:

Ixio automatically configures optimal settings based on the detected OS type:

The device list shows all detected USB drives with important information:

• Device Name: Model and size
• Device Path: System path (e.g., /dev/sdb)
• Status: Current operation status
• Filesystem: Current filesystem type
• Partition Table: Current partition scheme

During flashing, you'll see real-time progress information:

• Current Stage: Preparing, Writing, Verifying, Complete
• Progress Bar: Visual progress indicator
• Percentage: Numerical progress (0-100%)
• Speed: Current write speed (MB/s)
• ETA: Estimated time remaining

Verify ISO integrity before flashing:

1. Select an ISO file
2. Click "Show Hash Info" button
3. Wait for calculation to complete
4. Compare with official checksums

Problem: Selected file is not recognized as a valid ISO

Solutions:

• Verify the file is a supported format (ISO, IMG, ZIP, GZ, XZ, etc.)
• Check if the file is corrupted using hash calculation
• Try re-downloading the ISO file
• Ensure the file has the correct extension

Problem: No devices appear in the device list

Solutions:

• Ensure USB drive is properly connected
• Try a different USB port
• Check if the drive is recognized by your operating system
• On Linux, check if you have necessary permissions
• Try clicking "Refresh" or restarting the application

Problem: Flash operation fails with permission errors

Solutions:

# Option 1: Run with pkexec
pkexec ixio

# Option 2: Add user to disk group
sudo usermod -aG disk $USER
# Log out and log back in

Problem: Flash operation fails partway through

Solutions:

• Check USB drive for physical damage
• Try a different USB port (preferably USB 3.0)
• Ensure sufficient disk space on the USB drive
• Check system logs for detailed error messages
• Try a different USB drive to rule out hardware issues

Problem: Verification reports errors after flashing

Solutions:

• Try flashing again (may have been a temporary issue)
• Check USB drive for physical damage or bad sectors
• Try a different USB drive
• Disable verification if you're confident in the flash (not recommended)

Problem: Flash operation is very slow

Solutions:

• Use a USB 3.0 port instead of USB 2.0
• Try a different USB drive (some drives are slower)
• Close other applications that might be using disk I/O
• Check if the USB drive is overheating (let it cool down)

Yes! Ixio includes multiple safety features to protect your data:

• System drives are automatically hidden and blocked
• Multiple confirmation dialogs before flashing
• Visual warnings for internal drives
• Verification to ensure data integrity
• Open-source code that can be audited

Yes! Ixio supports simultaneous flashing of multiple USB drives. Simply select multiple devices from the list before clicking the FLASH button. Each device will have independent progress tracking, and if one fails, the others will continue.

Yes, flashing will completely erase all data on the USB drive. Always backup any important files before flashing. Ixio will warn you before proceeding with the operation.

Ixio automatically selects the optimal partition scheme based on your ISO. However, here's a general guide:

• GPT + UEFI: For modern computers (2012+) and Windows 11
• MBR + BIOS: For older computers and legacy systems
• Hybrid: For maximum compatibility when unsure

Verification typically takes about the same time as the write operation, as it needs to read back all the data. For a 4GB ISO on a USB 3.0 drive, expect 5-10 minutes. You can disable verification for faster flashing, but it's recommended to keep it enabled for data integrity.

Internal drives are hidden by default for safety. Flashing an internal drive can cause permanent data loss and system failure. If you absolutely need to flash an internal drive:

1. Enable "Show Internal Drives" toggle
2. Read and confirm the warning dialog
3. Internal drives will appear with red borders
4. System drives remain blocked for safety

⚠️ Use extreme caution!

Yes! Ixio is completely open source under the MIT license. You can view the source code, contribute improvements, report issues, and even fork the project on GitHub. We believe in transparency and community-driven development.

If you need additional help:

• GitHub Issues: Report bugs or request features
• GitHub Discussions: Ask questions and get community support
• Documentation: Check the project wiki for detailed guides
• Logs: Review application logs for error details